-
The strength of our blade
2019-10-14
Introducing our diamond saw blade. The diamond blade has W shape turbo segments,it is good for the cutting ,increasing the sharpness. Also, our diamond blade have different formula which suitable...
Read more
-
What material is used in diamond saw blade for stone concrete
2020-07-18
The matrix matrial are 50Mn,50Mn2V,65Mn,T12,T10,etc. The Powder are Cu,Ni,Mn,Co,Wu,Sn,Zn,Fe,Ti,Cr,Pb,Al,some rare earth metals. We,SANG,have strict formula systems to make the diamond saw blade suitab...
Read more
-
What are the factors that affect the cutting of diamond saw blade
2020-07-18
First:the cutting data. 1.the cutting speed;2.cutting depth;3.the feeding speed. Second:the other factors.1.the diamond 2.the powder.3.the hardness of bond;4.the cutting temperature;5.the cutting cons...
Read more
-
What causes diamond core drill bits to slip
2020-07-20
What causes diamond bits to slip when drilling into extremely hard formations? Many think that the reason is diamond powder can not open sharpness, the head of drill bit is too hard. Someone will try ...
Read more
-
how to judge concrete hardness
2020-08-31
Judge the concrete hardness Heavily reinforced concrete>reinforced concrete>concrete with hard aggregates>Normal concrete>Concrete with abrasive aggregates>green concrete>aspha...
Read more
-
E6 recommending diamond powder for diamond segment and diamond saw blade
2020-12-16
SDA SDA100 SDA85 SDA quartz granite lavastone limestone diorite quartzite gneiss crystal stone flakes limestone-marble sandstone granite with many quartz gabbr basalt syenite terrazzo Our company use ...
Read more
-
How to select suitable diamond core drill bit
2020-12-21
How to select suitable diamond core drill bit? Please see the following advice: 1.according to the hardness of drilling material. 2.according to the abrasive. 3.pay attention to the diameter and worki...
Read more
-
Why concrete saw blade can not cut granite?
2021-06-26
One client from Euro complain the concrete saw blade used for cutting granite and running very slowly. Yes, it should be , because the concrete is one kind of abrasive material, ...
Read more
-
How to choose a concrete saw blade?
2021-07-02
How to choose a concrete saw blade? 1.The cutting material.Green concrete, cured concrete, reinforced concrete or others. 2.The machine model.applied in Husqvarna,Hilti,Tyrolit machine,etc... 3.The po...
Read more
-
The Safety Precautions of diamond wire saw
2021-07-06
Thank you for choosing SANG’s wire saw. For safty , Please follow below regulations while the wire saw working 1. When entering the wire saw work area, please wear safety helmet. 2...
Read more
-
How to use and maintenance for bush hammer
2021-07-22
1.RPM of Manual grinding machine:RPM700~800 2.Use as mush water as possible to cool the grinding machine. 3.Pay attention to the pressure of the grinding machine on the bush hammer. Make sure that it ...
Read more
-
Why is my concrete floor grinder not sharp?
2021-09-15
Usually the grinding temperature is too high will cause the sharpness decrease. Solution: ---add some water; ---reduce the RPM.for example, 700 change to 650; ---reduce the weight of the machine; ---I...
Read more
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc