-
The strength of our blade
2019-10-14
Introducing our diamond saw blade. The diamond blade has W shape turbo segments,it is good for the cutting ,increasing the sharpness. Also, our diamond blade have different formula which suitable...
Read more
-
SANG DIAMOND TOOLS will attend The Big 5
2019-10-29
We will attend BIG 5. Date:25-28 November 2019 ARENA-D252 at the booth ,we will display diamond segment ,diamond saw blade,some stone tools and construction tools. Glad to see you then. The Middle Eas...
Read more
-
Happy holidays to everyone!
2019-12-25
Warm greetings and best wishes for a merry Christmas and happy New Year. From :SANG DIAMOND TOOLS
Read more
-
Installation guide of diamond saw blade
2020-01-07
How to install a diamond saw blade ☆ Installation guide: 1. Cleaning: clean the main shaft and flange of the saw , remove rust, grease, etc. All surfaces shall be wiped with fine gauze. 2. Deburring: ...
Read more
-
A preliminary study on common faults of diamond saw blade part 1
2020-01-16
low sharpness, low squaremeter Phenomenon: the cutting machine down less, the main motor current increases, the cutting feeding speed is slow, even saw blade appear noise and shaking. Reason 1 The con...
Read more
-
What material is used in diamond saw blade for stone concrete
2020-07-18
The matrix matrial are 50Mn,50Mn2V,65Mn,T12,T10,etc. The Powder are Cu,Ni,Mn,Co,Wu,Sn,Zn,Fe,Ti,Cr,Pb,Al,some rare earth metals. We,SANG,have strict formula systems to make the diamond saw blade suitab...
Read more
-
What are the factors that affect the cutting of diamond saw blade
2020-07-18
First:the cutting data. 1.the cutting speed;2.cutting depth;3.the feeding speed. Second:the other factors.1.the diamond 2.the powder.3.the hardness of bond;4.the cutting temperature;5.the cutting cons...
Read more
-
What causes diamond core drill bits to slip
2020-07-20
What causes diamond bits to slip when drilling into extremely hard formations? Many think that the reason is diamond powder can not open sharpness, the head of drill bit is too hard. Someone will try ...
Read more
-
how to judge concrete hardness
2020-08-31
Judge the concrete hardness Heavily reinforced concrete>reinforced concrete>concrete with hard aggregates>Normal concrete>Concrete with abrasive aggregates>green concrete>aspha...
Read more
-
E6 recommending diamond powder for diamond segment and diamond saw blade
2020-12-16
SDA SDA100 SDA85 SDA quartz granite lavastone limestone diorite quartzite gneiss crystal stone flakes limestone-marble sandstone granite with many quartz gabbr basalt syenite terrazzo Our company use ...
Read more
-
How to select suitable diamond core drill bit
2020-12-21
How to select suitable diamond core drill bit? Please see the following advice: 1.according to the hardness of drilling material. 2.according to the abrasive. 3.pay attention to the diameter and worki...
Read more
-
Husqvarna redi lock diamond grinding
2020-12-26
For Husqvarna machine, there are many types metal bond diamond tools, the typical things is redi lock. 1.Single segment or double segment: single segment--- used in lighter machine ,increase the press...
Read more
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc