-
how to judge and solve saw blade losing teeth segment problem
2020-04-07
Problem Solution The cutting material or the machine is not fix well,which causes the blade to twist or jam during cuting Maintain a firm grip on the material and secure the machine firmly. The blade ...
Read more
-
how to reduce the diamond saw blade steel core warpage?
2020-04-21
The Core Warpage The possibility Solution The steel core has been overheated Supply sufficient water and make sure water pump is producing sufficient water. The blade is spinning on spindle Check spin...
Read more
-
Solve the diamond segment cracked and stone uneven cutting
2020-05-05
For the cutting material, the metal bond is too hard.We should use a blade with a softer bond matrix. The steel core is not flat.We should straightening and tensioning the steel core. More details abo...
Read more
-
How to reduce stone cutting machine blade noise problem?
2020-05-11
How to reduce stone cutting machine saw blade noise problem? Reason Solution Water supply is not enough Make sure water hoses are clean and free from any blockages.Supply sufficient water flow to both...
Read more
-
how to solve the diamond saw blade arbor out of round
2020-05-19
Reason Solution The flange is not tightened properly,causing the blade rotate or vibrate on the spindle Wrench-tighten spindle nut to make certain the blade is adequately secured to prevent it from ro...
Read more
-
Why the core drill bit can not drill?
2020-06-30
When the hardness of diamond bond is not suitable for the stone,that will smoothen the diamond.So the diamond core drill bit can not drill the hole and can not be sharp. We can solve the drill problem...
Read more
-
What material is used in diamond saw blade for stone concrete
2020-07-18
The matrix matrial are 50Mn,50Mn2V,65Mn,T12,T10,etc. The Powder are Cu,Ni,Mn,Co,Wu,Sn,Zn,Fe,Ti,Cr,Pb,Al,some rare earth metals. We,SANG,have strict formula systems to make the diamond saw blade suitab...
Read more
-
What causes diamond core drill bits to slip
2020-07-20
What causes diamond bits to slip when drilling into extremely hard formations? Many think that the reason is diamond powder can not open sharpness, the head of drill bit is too hard. Someone will try ...
Read more
-
how to judge concrete hardness
2020-08-31
Judge the concrete hardness Heavily reinforced concrete>reinforced concrete>concrete with hard aggregates>Normal concrete>Concrete with abrasive aggregates>green concrete>aspha...
Read more
-
How to judge the diamond segment quality?
2020-12-01
The segment quality can be judged by the following things: 1.the hardness.The hardness should be in proper range,depends on the material. 2.the size.the size deviation is the reflect of the quality.In...
Read more
-
How to select suitable diamond core drill bit
2020-12-21
How to select suitable diamond core drill bit? Please see the following advice: 1.according to the hardness of drilling material. 2.according to the abrasive. 3.pay attention to the diameter and worki...
Read more
-
how to judge the diamond saw blade efficiency
2021-01-13
To judge the cutting effect of diamond saw blade, there are mainly three indexes: cutting efficiency, lifespan and processing Cutting efficiency is an indicator of productivity, usually cm2/min,m2/h, ...
Read more
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc