Concrete saw blades can also be called road cutting blades, which are a kind of diamond cutting tools. SANG saw blades briefly introduce the precautions when using concrete saw blades, hoping to help you further understand the use of concrete cutting saw blades.

Brief introduction of concrete saw blade:

A. It is used for cutting and pouring concrete for more than 24 hours and renovation of old roads, with fast cutting speed, grinding resistance and long service life;

B. The use of pre-alloyed powder as the matrix achieves the purpose of reducing the ineffective shedding of diamonds and exerting its use effect to the greatest extent. Can cut 1500～3000m;

C. Water cutting, suitable for road cutting machine;

D. The laser welding process is adopted, the cutter head is firmly combined, and it is not easy to drop the teeth;

F. For cutting concrete walls and brick walls;

G. U-shaped teeth improve the chip removal performance of the saw blade and increase the cutting speed;

H. Strong cutting ability to reinforced concrete;

I. Shorter cutting time and lower construction cost;

G. The diameter of the saw blade is 600~1200mm;

K. Other specifications can be produced according to customer requirements.

The concrete saw blade, as well as the blade and the cutting material, need to be firmly installed, and it must be confirmed that the material to be cut has been firmly fixed. It is necessary to select the correct concrete cutting blade, and the angle and number of teeth of the saw blade should be selected according to the material to be cut. Only in this way can the best cutting effect be better achieved.

The concrete cutting saw blade is firmly clamped. When installing the saw blade, it is necessary to remove the waste from the clamp part first, and then pay attention to the purpose of the rotating target, and install the concrete saw blade firmly.

It is necessary to select an appropriate amount of feed. When starting cutting and stopping cutting, do not feed too fast. If it is too fast, it will cause broken teeth or damage. Requires adequate use of cutting oil.

The above is the use method of concrete saw blade. Pay attention when using it. At the same time, the use of concrete cutting saw blade also has its corresponding use requirements, and you need to understand it before using it.

For more details about diamond saw blade or polishing tool,contact us

WWW.SANGTOOLS.COM

INFO@SANGTOOLS.COM