-
how to reduce the diamond saw blade steel core warpage?
2020-04-21
The Core Warpage The possibility Solution The steel core has been overheated Supply sufficient water and make sure water pump is producing sufficient water. The blade is spinning on spindle Check spin...
Read more
-
Solve the diamond segment cracked and stone uneven cutting
2020-05-05
For the cutting material, the metal bond is too hard.We should use a blade with a softer bond matrix. The steel core is not flat.We should straightening and tensioning the steel core. More details abo...
Read more
-
How to reduce stone cutting machine blade noise problem?
2020-05-11
How to reduce stone cutting machine saw blade noise problem? Reason Solution Water supply is not enough Make sure water hoses are clean and free from any blockages.Supply sufficient water flow to both...
Read more
-
how to solve the diamond saw blade arbor out of round
2020-05-19
Reason Solution The flange is not tightened properly,causing the blade rotate or vibrate on the spindle Wrench-tighten spindle nut to make certain the blade is adequately secured to prevent it from ro...
Read more
-
Why the core drill bit can not drill?
2020-06-30
When the hardness of diamond bond is not suitable for the stone,that will smoothen the diamond.So the diamond core drill bit can not drill the hole and can not be sharp. We can solve the drill problem...
Read more
-
What material is used in diamond saw blade for stone concrete
2020-07-18
The matrix matrial are 50Mn,50Mn2V,65Mn,T12,T10,etc. The Powder are Cu,Ni,Mn,Co,Wu,Sn,Zn,Fe,Ti,Cr,Pb,Al,some rare earth metals. We,SANG,have strict formula systems to make the diamond saw blade suitab...
Read more
-
How to judge the diamond segment quality?
2020-12-01
The segment quality can be judged by the following things: 1.the hardness.The hardness should be in proper range,depends on the material. 2.the size.the size deviation is the reflect of the quality.In...
Read more
-
how to judge the diamond saw blade efficiency
2021-01-13
To judge the cutting effect of diamond saw blade, there are mainly three indexes: cutting efficiency, lifespan and processing Cutting efficiency is an indicator of productivity, usually cm2/min,m2/h, ...
Read more
-
how to use bush hammer make different stone surface
2021-07-22
Bush hammered’s grit can be changed through the adjustment of spring elasticity on bush hammer, or the press of the manual grinding machine. Both enlarging spring distance to reduce spring elasticity ...
Read more
-
How to use and maintenance for bush hammer
2021-07-22
1.RPM of Manual grinding machine:RPM700~800 2.Use as mush water as possible to cool the grinding machine. 3.Pay attention to the pressure of the grinding machine on the bush hammer. Make sure that it ...
Read more
-
Classification of diamond drill bits
2022-05-16
There are many classification methods of diamond engineering drill bits. The most common methods are as follows: 1. Classification by use Engineering drills are mainly used for engineering constructio...
Read more
-
SANG The 23rd China Xiamen International Stone Fair
2023-05-05
Xiamen International Stone Fair is one of the most significant events in the global stone industry. It is an annual event held in Xiamen, China, and is regarded as the largest stone exhibition in the ...
Read more
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc