| stone material | hard granite | mid-hard granite | soft granite | hard marble | soft marble | sandstone |
| feeding speed(m/s) | 25-30 | 30-35 | 35-40 | 40-45 | 45-50 | 50-65 |
Feeding speed, the material performance mainly depends on the character speciality of each kind of material.If the speed is too high, the diamond will loss, even causing the saw blade fast consumption.If the speed is too low, the saw blades can't normal growing with grace process, and thus lose cutting ability.
In general, the feeding speed should be slow when cutting, and should be equal when sawing. For typical materials , when cutting depth is 6mm, the following feed speed is recommended for your reference.Units: mm/min
| material | granite | marble | concrete | Jade | ceramic or quartz |
| speed | 200-500 | 1000-2000 | 250-400 | 70-125 | 250-400 |
More details please contact us .
www.sangtools.com
info@sangtools.com
24/7 via fax, email or phone.
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc