-
short cutting life of diamond saw blade and regular solution
2020-03-10
Problem Cause Remedy Short cutting life Using a wet cutting blade for dry cutting Use a dry blade instead Insufficient supply of water to the blade Make sure water hoses are clean and fre...
Read more
-
solve the diamond saw blade cutting problem
2020-03-16
Problem Cause Solution Blade won't cut The bond matrix is too hard for the cutting material Use a soft bond blade Blade won't cut The cutting material is too hard for the blade Use the blade cut some ...
Read more
-
How to solve the diamond falling on the diamond saw blade
2020-03-23
Problem Cause Solution Diamond powder falling Using a wet cutting blade for dry cutting Use a dry blade instead Diamond powder falling Insufficient supply of water to the blade Make sure water h...
Read more
-
how to judge and solve saw blade losing teeth segment problem
2020-04-07
Problem Solution The cutting material or the machine is not fix well,which causes the blade to twist or jam during cuting Maintain a firm grip on the material and secure the machine firmly. The blade ...
Read more
-
how to reduce the diamond saw blade steel core warpage?
2020-04-21
The Core Warpage The possibility Solution The steel core has been overheated Supply sufficient water and make sure water pump is producing sufficient water. The blade is spinning on spindle Check spin...
Read more
-
How to solve uneven diamond segment wear problem?
2020-04-28
Reason Solution Insufficient supply of water to the blade Make sure water hoses are clean and free from any blockages.Supply sufficient water flow to both sides of the blade Defective machine which ca...
Read more
-
Solve the diamond segment cracked and stone uneven cutting
2020-05-05
For the cutting material, the metal bond is too hard.We should use a blade with a softer bond matrix. The steel core is not flat.We should straightening and tensioning the steel core. More details abo...
Read more
-
How to reduce stone cutting machine blade noise problem?
2020-05-11
How to reduce stone cutting machine saw blade noise problem? Reason Solution Water supply is not enough Make sure water hoses are clean and free from any blockages.Supply sufficient water flow to both...
Read more
-
how to solve the diamond saw blade arbor out of round
2020-05-19
Reason Solution The flange is not tightened properly,causing the blade rotate or vibrate on the spindle Wrench-tighten spindle nut to make certain the blade is adequately secured to prevent it from ro...
Read more
-
What material is used in diamond saw blade for stone concrete
2020-07-18
The matrix matrial are 50Mn,50Mn2V,65Mn,T12,T10,etc. The Powder are Cu,Ni,Mn,Co,Wu,Sn,Zn,Fe,Ti,Cr,Pb,Al,some rare earth metals. We,SANG,have strict formula systems to make the diamond saw blade suitab...
Read more
-
What are the factors that affect the cutting of diamond saw blade
2020-07-18
First:the cutting data. 1.the cutting speed;2.cutting depth;3.the feeding speed. Second:the other factors.1.the diamond 2.the powder.3.the hardness of bond;4.the cutting temperature;5.the cutting cons...
Read more
-
What causes diamond core drill bits to slip
2020-07-20
What causes diamond bits to slip when drilling into extremely hard formations? Many think that the reason is diamond powder can not open sharpness, the head of drill bit is too hard. Someone will try ...
Read more
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc